Showing all 9 results

FZUB – Undercut Drill Bit for ZYCON Hammerset

Special drill bit for creating undercut drill holes in concrete for processing... more

Special drill bit for creating undercut drill holes in concrete for processing the ZYCON undercut anchors FZA, FZA-I, and FZEA. Drill bit with stop plate and joint for quick, approval-compliant creation of conical undercut drill holes. The top features:

  • SDS-Plus adapter
  • High-quality, durable design.

 

 

FTC-ZS Zinc Spray – 400 ml

Fast-drying surface and corrosion protection with outstanding long-term effect... more

Fast-drying surface and corrosion protection with outstanding long-term effect for metals.

The FTC Zinc Spray are useful for all kind of metals that need corrosion protection and is perfect for the coating of drilling and cutting points as well as welded joints. The surface is dust-dry after just approx. 8 minutes and it is fully hardened within 24 hours. The FTC Zinc Spray have excellent corrosion protection with long-term effect and a heat-resistant up to approx. 500°C.

 

Sales Units: 12 pcs

DOWNLOAD PDF – GHS Safety Data Sheet: FTC-ZS Zinc Spray (0,4 MB)

FTC Zinc Alu Spray – 400 ml

Ideal for repairing damaged zinc coatings using colour matching corrosion... more

Ideal for repairing damaged zinc coatings using colour matching corrosion protection.

Zinc Alu Spray enables a subtle repair to damaged hot-dip galvanised areas thanks to its colour matching with the hot-dip galvanisation. Thanks to the excellent holding properties on bare metal, it guarantees a lasting connection to the base material. The fast-drying Zinc Alu Spray guarantees good, weatherproof corrosion protection and, as such, is suitable for use both indoors and out.

  • For all iron and steel surfaces
  • Hot-dip galvanised surfaces following drilling, ironwork or welding
  • Non-ferrous heavy metal

 

DOWNLOAD PDF – GHS Safety Data Sheet: FTC Zinc Alu Spray (0,3 MB)

High Performance Anchor FH II S

The push-through anchor for fixings with sophisticated design in cracked... more

The push-through anchor for fixings with sophisticated design in cracked concrete

The anchor construction allows for wide-ranging head shapes for fixing points with sophisticated design. The ideal interaction of screw shank and sleeve allows for a high shear load, thus fewer fixing points are required. The international approvals guarantee maximum safety and the best performance. These approvals even cover use in earthquake zones (seismic). The optimized geometry reduces the energy required for installation.

 

 

 

 
DOWNLOAD PDF – Approval ETA 07-0025 High Performance Anchor FH II 08/18 (4,3 MB)
DOWNLOAD PDF – Approval ICC High Performance Anchor FH II (2,1 MB)

 

Bolt Anchor FAZ II

For highest demands. Powerful and flexible. The FAZ II is suitable for... more

For highest demands. Powerful and flexible.

The FAZ II is suitable for prepositioned and push-through installation and is also ideal for standoff installation thanks to the long thread. The FAZ ll expansion clip enables the highest load bearing capacity, thus fewer fixing points and smaller anchor plates are required. The reduced anchorage depth allows for significantly reduced drill hole depths and thus a noticeably quicker installation. Fewer hammer blows when hammering in the anchor, together with the low torque slippage, ensure a noticeably simple and comfortable setting process

 

 

 

DOWNLOAD PDF – ETA 05-0069 Bolt Anchor FAZ II 04/20 (1,1 MB)
DOWNLOAD PDF – ICC ESR-2948-2020 Bolt Anchor FAZ II (0,9 MB)

Bolt Anchor FBN II

The cost-efficient fixing for flexible use in non-cracked concrete. The FBN II... more

The cost-efficient fixing for flexible use in non-cracked concrete.

The FBN II is suitable for prepositioned and push-through installation; also suitable for stand-off installation under certain conditions. The standard anchorage depth achieves the maximum load-bearing capacities, thus fewer fixing points and smaller anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This minimizes the amount of time needed for installation whilst increasing flexibility.

 

 
DOWNLOAD PDF – Approval ETA-07/0211 Bolt Anchor FBN II (1,7 MB)
DOWNLOAD PDF – Approval ETA-18/0101 Bolt Anchor FBN II (2,3 MB)

High Performance Anchor FH II CSK

The push-through anchor for fixings with sophisticated design in cracked... more

The push-through anchor for fixings with sophisticated design in cracked concrete.

The anchor construction allows for wide-ranging head shapes for fixing points with sophisticated design. The ideal interaction of screw shank and sleeve allows for a high shear load, thus fewer fixing points are required. The international approvals guarantee maximum safety and the best performance. These approvals even cover use in earthquake zones (seismic). The optimized geometry reduces the energy required for installation.

 

 

 
DOWNLOAD PDF – Approval ETA 07-0025 High Performance Anchor FH II 08/18 (4,3 MB)
DOWNLOAD PDF – Approval ICC High-performance-anchor-FH-II (2,1 MB)

Setting Tool EAW H Plus for HammerSet EA II

Highest safety through perfect expansioning of the anchor. Manual setting tool... more

Highest safety through perfect expansioning of the anchor.

Manual setting tool with hand impact protection for fixing Fischer Hammerset anchors EA II M10. The manual setting tool is build with ergonomic plastic to handle and hand impact protection for quick, safe fixing of Fischer Hammerset anchors EA II.

 

HammerSet Anchor EA II

The internally threaded anchor with rim for simple hammerset installation The... more

The internally threaded anchor with rim for simple hammerset installation

The Hammerset EA II is suitable for pre-positioned installation. The sleeve is then expanded against the drill hole wall by driving in the internal bolt with the EAW H Plus setting tool (alternative: EA II-SDS machine setting tool). The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammers installation. The metric internal thread has an ideal adaptation ability, allowing for the use of standard screws or threaded rods to suit the intended purpose.

DOWNLOAD PDF – Approval-ETA 07-0135 HammerSet Anchor EA-II (2,2 MB)