Showing all 9 results

AM 35 – Powder Actuated Tool – Single Shot

The Power Drive AM35 Stud Driver is a safe tool that can be employed for a wide... more

The Power Drive AM35 Stud Driver is a safe tool that can be employed for a wide range of applications by professional, certified users for driving elements of the AnchorMark accessories product range developed specially for this field of application into concrete, steel, solid brick and solid lime-sand brick.

Anchormark Logo

 

AM 60 – Powder Actuated Tool – Magazine

Power Drive AM60 Stud Driver (8 MM TOOL - 5/16" TOOL) The... more

Power Drive AM60 Stud Driver (8 MM TOOL – 5/16″ TOOL)

The AM60 Magazine tool has been developed to drive fastener elements into concrete, steel, solid bricks, solid sand-lime bricks and other base materials suitable for direct installation. The tool works according to the piston principle, which permits optimum working safety and fastening reliability.

Anchormark Logo

 

 

 

DuoPower – Expansion Plug 2K

The duo of power and intelligence. The fischer 2 K-Nylon Plug DUOPOWER is... more

The duo of power and intelligence.

The fischer 2 K-Nylon Plug DUOPOWER is suitable for prepositioned and push-through installation. The duo of two different materials and its multi-functional abilities (expanding, folding, and knotting) extend the range of applications to additional materials with top loads. The plug has received great feedback, with users commenting on the feel-good factor. You can feel exactly when the plug is installed perfectly.

 

 

 

FIS H K – Anchor Sleeve Nylon For Chemical Injection

The versatile fixing system with injection anchor sleeves for perforated brick... more

The versatile fixing system with injection anchor sleeves for perforated brick masonry.

The plastic fischer injection anchor sleeve FIS H K is the system component for the use of fischer injection mortars in perforated brick masonry within through-type installations. To do so, the anchor sleeve is placed in the drill hole and filled with injection mortar from the anchor sleeve base. When setting the rod anchor or the internal threaded anchor, the mortar is pressed through the lattice structure and then connects with the perforated brick by an interlock. This means that the load is directed into the building material. Non-bearing layers can also be bridged with the injection anchor sleeve.

     

Stud AN – Magazined Nails for Powder Actuated Tool

The AN stud is suitable for the permanent and temporary fixing of fasteners in... more

The AN stud is suitable for the permanent and temporary fixing of fasteners in structural steel, concrete, solid brick and solid lime-sand brick. Studs in magazines can only be used in stud drivers having a suitable magazine.

The smooth shaft of the AN Stud is built from high-strength steel, mechanically galvanised (minimum surface thickness 8 μm) and with ballistic tip. It can be used for Stud Driver AM 60.

.

Sales units: 200 pcs

Stud AN – Nail for Powder Actuated Tool

The smooth shaft of the Stud AN is built from high-strength steel, mechanically... more

The smooth shaft of the Stud AN is built from high-strength steel, mechanically galvanised (minimum surface thickness 8 μm) and with ballistic tip. It can be used for Stud Driver AM 35 and AM 60.

Sales units: 200 pcs

Stud AN W25 – Nail with Washer for Powder Actuated Tool

The knurled shaft of the Stud ANS is built from high-strength steel,... more

The knurled shaft of the Stud ANS is built from high-strength steel, mechanically galvanised (minimum surface thickness 8 μm) and with ballistic tip for maximum holding force in steel. It can be used for Stud Driver AM 35 and AM 60.

.

Stud ANC – Nail with Ceiling Bracket for Powder Actuated Tool

The knurled shaft of the Stud ANC is built from high-strength steel,... more

The knurled shaft of the Stud ANC is built from high-strength steel, mechanically galvanised (minimum surface thickness 8 μm) and with ballistic tip for maximum holding force in steel. It can be used for Stud Driver AM 35 and AM 60.

.

Sales units: 200 pcs

Stud ANS – Single Shot Nail for Powder Actuated Tool

The knurled shaft of the Stud ANS is built from high-strength steel,... more

The knurled shaft of the Stud ANS is built from high-strength steel, mechanically galvanised (minimum surface thickness 8 μm) and with ballistic tip for maximum holding force in steel. It can be used for Stud Driver AM 35 and AM 60.

Sales units: 200 pcs