Showing all 10 results

AM Premium Concrete Screw

High end, powerful screw solution for fast and simple installation. The AM... more

High end, powerful screw solution for fast and simple installation.

The AM Premium Concrete Screws are simple and time-saving threaded screws for the use in concrete and the RUSPERT® coating provides excellent corrosion protection. Once screwed into the hole the thread taps into concrete for positive fit anchorage. The concrete screw are completely removable anchor suitable for temporary fixings and virtually expansion-free operation allows cost-efficient fixing with small axial spaces and edge distances.

Anchormark Logo

 

   
DOWNLOAD PDF – ETA-15-0905 Premium Concrete-Screw AM (0,9 MB)

Internally Threaded Ruspert® – Concrete Screws

This screws offers unlimited application possibilities. It is usable without... more

This screws offers unlimited application possibilities. It is usable without special tools only with an impact wrench. It is simple and fast to use. No special tools are required. The RUSPERT® coating provides excellent corrosion protection.

The internally threaded concrete screw gets driven into the drill hole with an impact wrench.

For the use in concrete (non-safety relevant applications).

Ultracut FBS II – CSK – Concrete Screw, Countersunk Head

The high-performance concrete screw for easy installation. Ultracut provides... more

The high-performance concrete screw for easy installation.

Ultracut provides the best possible flexibility in load and fixture thickness with up to three permitted screw-in depths. The specialized saw tooth geometry allows it to cut quickly into the concrete. No drill hole cleaning is required for mounting in ceilings or floors or when using hollow drill bits with suction. The anchoring is free from expansion pressure (undercut), ensuring the lowest possible axial spacing and edge spacing. ETA approval covers application in cracked concrete, as well as seismic performance categories C1 and C2. Adjustments conforming to the approval makes it possible to loosen the concrete screws 2x, to place materials under and/or align the anchor base plate. National approval regulates multiple uses for temporary anchoring (e.g. formwork construction).

 

         
DOWNLOAD PDF – ETA-Approval-15-0352-Fischer-Ultracut-FBS II (4,1 MB)
DOWNLOAD PDF – Technical Data Sheet – Ultracut-FBS II (0,25 MB)

 

Ultracut FBS II Concrete Screw

The high-performance concrete screw for easy installation. Ultracut provides... more

The high-performance concrete screw for easy installation.

Ultracut provides the best possible flexibility in load and fixture thickness with up to three permitted screw-in depths. The specialized saw tooth geometry allows it to cut quickly into the concrete. No drill hole cleaning is required for mounting in ceilings or floors or when using hollow drill bits with suction. The anchoring is free from expansion pressure (undercut), ensuring the lowest possible axial spacing and edge spacing. ETA approval covers application in cracked concrete, as well as seismic performance categories C1 and C2. Adjustments conforming to the approval makes it possible to loosen the concrete screws 2x, to place materials under and/or align the anchor base plate. National approval regulates multiple uses for temporary anchoring (e.g. formwork construction).

 

         
DOWNLOAD PDF – ETA-Approval-15-0352-Fischer-Ultracut-FBS II (4,1 MB)
DOWNLOAD PDF – Technical Data Sheet – Ultracut-FBS II (0,25 MB)

 

Ultracut FBS II Concrete Screw A4

The high-performance concrete screw for easy installation. The ULTRACUT FBS II... more

The high-performance concrete screw for easy installation.

The ULTRACUT FBS II A4 is designed for push-through installation. The specially hardened red tip provides a faster and more secure installation. It is recommended to use an impact wrench with a suitable impact socket or torx bit. Drill holes do not need to be cleaned during vertical installation (ceiling and floor) or when using a hollow drill. For floor fixing the hole must be drilled 3 x Ø deeper. The ETA approval covers applications in cracked concrete, as well as seismic performance categories C1 and C2. The concrete screw ULTRACUT FBS II A4 offers the possibility for usage in masonry (solid building material).

 

 



 

 
DOWNLOAD PDF – ETA-Approval-ETA-17/0740-Fischer-Ultracut-FBS II-Concrete-Screw (4,1 MB)

FTC Zinc Alu Spray – 400 ml

Ideal for repairing damaged zinc coatings using colour matching corrosion... more

Ideal for repairing damaged zinc coatings using colour matching corrosion protection.

Zinc Alu Spray enables a subtle repair to damaged hot-dip galvanised areas thanks to its colour matching with the hot-dip galvanisation. Thanks to the excellent holding properties on bare metal, it guarantees a lasting connection to the base material. The fast-drying Zinc Alu Spray guarantees good, weatherproof corrosion protection and, as such, is suitable for use both indoors and out.

  • For all iron and steel surfaces
  • Hot-dip galvanised surfaces following drilling, ironwork or welding
  • Non-ferrous heavy metal

 

DOWNLOAD PDF – GHS Safety Data Sheet: FTC Zinc Alu Spray 4.0 (0,3 MB)

FTC-ZS Zinc Spray – 400 ml

Fast-drying surface and corrosion protection with outstanding long-term effect... more

Fast-drying surface and corrosion protection with outstanding long-term effect for metals.

The FTC Zinc Spray are useful for all kind of metals that need corrosion protection and is perfect for the coating of drilling and cutting points as well as welded joints. The surface is dust-dry after just approx. 8 minutes and it is fully hardened within 24 hours. The FTC Zinc Spray have excellent corrosion protection with long-term effect and a heat-resistant up to approx. 500°C.

 

Sales Units: 12 pcs

DOWNLOAD PDF – GHS Safety Data Sheet: FTC-ZS Zinc Spray 5.0 (0,7 MB)

KD-290 – All-Round Adhesive Gluing & Sealing

The flexible adhesive and sealant for interior and exterior use. The MS... more

The flexible adhesive and sealant for interior and exterior use.

The MS polymer® allows for an elastic adhesion for vibration-dampening and stress-compensating connections for demanding applications. The extremely high initial adhesion of 110 kg/m² makes it possible to attach lots of components without the need for additional fixing, and thus reduces the amount of time required. The fischer KD-290 material are free from solvents, MDI and silicone and can be painted. Available in the colours: white, grey and black.

 

 

Sales Units: 24 pcs

DOWNLOAD PDF – GHS Safety Data Sheet: DKM 3.0 (0,3 MB)