Showing all 4 results

FIS SB 390 S – Superbond Mortar

The concrete all - rounder. Thanks to its high bond strength, Superbond... more

The concrete all – rounder.

Thanks to its high bond strength, Superbond mortar FIS SB achieves a very high load level for safe use in cracked and non-cracked concrete. The Superbond mortar can even be used at extremely high temperatures of up to +150 °C. This opens up new application fields, where no chemical anchor could be used previously. The Superbond mortar FIS SB is approved for seismic applications, which ensures safety even under extreme conditions.

 

 
DOWNLOAD PDF – ETA-12/0258: Superbond mortar FIS SB 390 S (5,5 MB)
DOWNLOAD PDF – ICC – ESR 3572: Superbond mortar FIS SB 390 S (1,8 MB)
DOWNLOAD PDF – GHS Safety Data Sheet FIS SB A (0.5 MB)
DOWNLOAD PDF – GHS Safety Data Sheet FIS SB B (0.5 MB)

Threaded Rod Internally: RGMI – Chisel Point

The fixing system with internally threaded anchor for non-cracked... more

The fixing system with internally threaded anchor for non-cracked concrete

Often used for removable or temporary fixings, e.g. for machines. The internally threaded anchor RG MI allows for surface flush removal and reuse of the fixing point, and therefore offers the best possible flexibility. The metric internal thread has an ideal adaptation ability, allowing for the use of standard screws or threaded rods to suit the intended purpose.

 
DOWNLOAD PDF – ETA-12/0258: internally threaded rod (2,6 MB)

 

Threaded Rod: ATR – Galvanised, Chisel Point

The injection system is suitable for prepositioned and push-through... more

The injection system is suitable for prepositioned and push-through installation when combined with threaded rod ATR. The mortar is extruded bubble free from the drill hole base and the mortar bonds the entire surface of the threaded rod with the drill hole wall and seals the drill hole. The threaded rod is set manually, by lightly rotating it until it reaches the drill hole base.

Version: Hot dip galvanized, Grade 5.8

Anchormark Logo

Threaded Rod: RG M – Stainless, Chisel Point

The proven rod anchor for external use with a mortar cartridge or injection... more

The proven rod anchor for external use with a mortar cartridge or injection mortar.

The fischer rod anchor RG M is produced from stainless steel. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in external areas.