Showing all 14 results

AM Premium Concrete Screw

High end, powerful screw solution for fast and simple installation. The AM... more

High end, powerful screw solution for fast and simple installation.

The AM Premium Concrete Screws are simple and time-saving threaded screws for the use in concrete and the RUSPERT® coating provides excellent corrosion protection. Once screwed into the hole the thread taps into concrete for positive fit anchorage. The concrete screw are completely removable anchor suitable for temporary fixings and virtually expansion-free operation allows cost-efficient fixing with small axial spaces and edge distances.

Anchormark Logo

 

   
DOWNLOAD PDF – ETA-15-0905 Premium Concrete-Screw AM (0,9 MB)

Bolt Anchor FAZ II

For highest demands. Powerful and flexible. The FAZ II is suitable for... more

For highest demands. Powerful and flexible.

The FAZ II is suitable for prepositioned and push-through installation and is also ideal for standoff installation thanks to the long thread. The FAZ ll expansion clip enables the highest load bearing capacity, thus fewer fixing points and smaller anchor plates are required. The reduced anchorage depth allows for significantly reduced drill hole depths and thus a noticeably quicker installation. Fewer hammer blows when hammering in the anchor, together with the low torque slippage, ensure a noticeably simple and comfortable setting process

 

 

DOWNLOAD PDF – Approval ETA 05-0069 Bolt Anchor FAZ II (3 MB)
DOWNLOAD PDF – Approval ICC ESR-2948-2020 Bolt Anchor FAZ II (1,0 MB)

Bolt Anchor FBN II

The cost-efficient fixing for flexible use in non-cracked concrete. The FBN II... more

The cost-efficient fixing for flexible use in non-cracked concrete.

The FBN II is suitable for prepositioned and push-through installation; also suitable for stand-off installation under certain conditions. The standard anchorage depth achieves the maximum load-bearing capacities, thus fewer fixing points and smaller anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This minimizes the amount of time needed for installation whilst increasing flexibility.

 

 
DOWNLOAD PDF – Approval ETA 07-0211 Bolt Anchor FBN II (2,3 MB)

FIS SB 390 S – Superbond Mortar

The concrete all - rounder. Thanks to its high bond strength, Superbond... more

The concrete all – rounder.

Thanks to its high bond strength, Superbond mortar FIS SB achieves a very high load level for safe use in cracked and non-cracked concrete. The Superbond mortar can even be used at extremely high temperatures of up to +150 °C. This opens up new application fields, where no chemical anchor could be used previously. The Superbond mortar FIS SB is approved for seismic applications, which ensures safety even under extreme conditions.

 

 
DOWNLOAD PDF – ETA-12/0258: Superbond mortar FIS SB 390 S (2,2 MB)
DOWNLOAD PDF – ICC – ESR 3572: Superbond mortar FIS SB 390 S (1,8 MB)
DOWNLOAD PDF – GHS Safety Data Sheet FIS SB A (0.5 MB)
DOWNLOAD PDF – GHS Safety Data Sheet FIS SB B (0.5 MB)

fischer Nylon Expansion ANCHOR M with Brass Cone for Metric Thread

The powerful nylon expansion anchor with brass cone for metric threads. The... more

The powerful nylon expansion anchor with brass cone for metric threads.

The anchor’s high expansion makes it insensitive to building material imperfections. This guarantees a simple and secure installation and the internal thread allows for the use of standard metric screws or threaded rods, and for surface flush removal and reuse of the fixing point, providing great flexibility.

 

 

 

FZUB – Undercut Drill Bit for ZYCON Hammerset

Special drill bit for creating undercut drill holes in concrete for processing... more

Special drill bit for creating undercut drill holes in concrete for processing the ZYCON undercut anchors FZA, FZA-I, and FZEA. Drill bit with stop plate and joint for quick, approval-compliant creation of conical undercut drill holes. The top features:

  • SDS-Plus adapter
  • High-quality, durable design.

 

 

HammerSet Anchor EA II

The internally threaded anchor with rim for simple hammerset installation The... more

The internally threaded anchor with rim for simple hammerset installation

The Hammerset EA II is suitable for pre-positioned installation. The sleeve is then expanded against the drill hole wall by driving in the internal bolt with the EAW H Plus setting tool (alternative: EA II-SDS machine setting tool). The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammers installation. The metric internal thread has an ideal adaptation ability, allowing for the use of standard screws or threaded rods to suit the intended purpose.

DOWNLOAD PDF – Approval-ETA 07-0135 HammerSet Anchor EA-II (2,2 MB)

High Performance Anchor FH II CSK

The push-through anchor for fixings with sophisticated design in cracked... more

The push-through anchor for fixings with sophisticated design in cracked concrete.

The anchor construction allows for wide-ranging head shapes for fixing points with sophisticated design. The ideal interaction of screw shank and sleeve allows for a high shear load, thus fewer fixing points are required. The international approvals guarantee maximum safety and the best performance. These approvals even cover use in earthquake zones (seismic). The optimized geometry reduces the energy required for installation.

 

         
DOWNLOAD PDF – Approval ETA 07-0025 High Performance Anchor FH II (3,8 MB)
DOWNLOAD PDF – Approval ICC High-performance-anchor-FH-II (0,9 MB)

High Performance Anchor FH II S

The push-through anchor for fixings with sophisticated design in cracked... more

The push-through anchor for fixings with sophisticated design in cracked concrete

The anchor construction allows for wide-ranging head shapes for fixing points with sophisticated design. The ideal interaction of screw shank and sleeve allows for a high shear load, thus fewer fixing points are required. The international approvals guarantee maximum safety and the best performance. These approvals even cover use in earthquake zones (seismic). The optimized geometry reduces the energy required for installation.

         
DOWNLOAD PDF – Approval ETA 07-0025 High Performance Anchor FH II (3,7 MB)
DOWNLOAD PDF – Approval ICC High Performance Anchor FH II (0,9 MB)

 

Internally Threaded Ruspert® – Concrete Screws

This screws offers unlimited application possibilities. It is usable without... more

This screws offers unlimited application possibilities. It is usable without special tools only with an impact wrench. It is simple and fast to use. No special tools are required. The RUSPERT® coating provides excellent corrosion protection.

The internally threaded concrete screw gets driven into the drill hole with an impact wrench.

For the use in concrete (non-safety relevant applications).

Setting Tool EAW H Plus for HammerSet EA II

Highest safety through perfect expansioning of the anchor. Manual setting tool... more

Highest safety through perfect expansioning of the anchor.

Manual setting tool with hand impact protection for fixing Fischer Hammerset anchors EA II M10. The manual setting tool is build with ergonomic plastic to handle and hand impact protection for quick, safe fixing of Fischer Hammerset anchors EA II.

 

Threaded Rod Internally: RGMI – Chisel Point

The fixing system with internally threaded anchor for non-cracked... more

The fixing system with internally threaded anchor for non-cracked concrete

Often used for removable or temporary fixings, e.g. for machines. The internally threaded anchor RG MI allows for surface flush removal and reuse of the fixing point, and therefore offers the best possible flexibility. The metric internal thread has an ideal adaptation ability, allowing for the use of standard screws or threaded rods to suit the intended purpose.

 
DOWNLOAD PDF – ETA-12/0258: internally threaded rod (2,6 MB)

 

Threaded Rod: ATR – Galvanised, Chisel Point

The injection system is suitable for prepositioned and push-through... more

The injection system is suitable for prepositioned and push-through installation when combined with threaded rod ATR. The mortar is extruded bubble free from the drill hole base and the mortar bonds the entire surface of the threaded rod with the drill hole wall and seals the drill hole. The threaded rod is set manually, by lightly rotating it until it reaches the drill hole base.

Version: Hot dip galvanized, Grade 5.8

Anchormark Logo

Threaded Rod: RG M – Stainless, Chisel Point

The proven rod anchor for external use with a mortar cartridge or injection... more

The proven rod anchor for external use with a mortar cartridge or injection mortar.

The fischer rod anchor RG M is produced from stainless steel. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in external areas.