Showing all 13 results

AM Premium Concrete Screw

High end, powerful screw solution for fast and simple installation. The AM... more

High end, powerful screw solution for fast and simple installation.

The AM Premium Concrete Screws are simple and time-saving threaded screws for the use in concrete and the RUSPERT® coating provides excellent corrosion protection. Once screwed into the hole the thread taps into concrete for positive fit anchorage. The concrete screw are completely removable anchor suitable for temporary fixings and virtually expansion-free operation allows cost-efficient fixing with small axial spaces and edge distances.

Anchormark Logo

 

   
DOWNLOAD PDF – ETA-15-0905 Premium Concrete-Screw AM (0,9 MB)

Bolt Anchor FAZ II

For highest demands. Powerful and flexible. The FAZ II is suitable for... more

For highest demands. Powerful and flexible.

The FAZ II is suitable for prepositioned and push-through installation and is also ideal for standoff installation thanks to the long thread. The FAZ ll expansion clip enables the highest load bearing capacity, thus fewer fixing points and smaller anchor plates are required. The reduced anchorage depth allows for significantly reduced drill hole depths and thus a noticeably quicker installation. Fewer hammer blows when hammering in the anchor, together with the low torque slippage, ensure a noticeably simple and comfortable setting process

 

 

DOWNLOAD PDF – Approval ETA 05-0069 Bolt Anchor FAZ II (3 MB)
DOWNLOAD PDF – Approval ICC ESR-2948-2020 Bolt Anchor FAZ II (1,0 MB)

Bolt Anchor FBN II

The cost-efficient fixing for flexible use in non-cracked concrete. The FBN II... more

The cost-efficient fixing for flexible use in non-cracked concrete.

The FBN II is suitable for prepositioned and push-through installation; also suitable for stand-off installation under certain conditions. The standard anchorage depth achieves the maximum load-bearing capacities, thus fewer fixing points and smaller anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This minimizes the amount of time needed for installation whilst increasing flexibility.

 

 
DOWNLOAD PDF – Approval ETA 07-0211 Bolt Anchor FBN II (2,3 MB)

Concrete Screw FBS – A4

The FBS A4 ensures very high loads, thus resulting in fewer anchoring points.... more

The FBS A4 ensures very high loads, thus resulting in fewer anchoring points. The enhanced stainless steel version A4 now also allows anchoring applications in outdoor and damp areas. The version type CSK (countersunk head) offers expanded use for applications with challenging designs. The ETA approval Option 1 governs the use of single-point fixings in cracked and non-cracked concrete.

 

 
DOWNLOAD PDF – ETA-F-11-0095-concrete-screws-FBS.pdf (2,1 MB)

Concrete Screws FBS – A4 – Countersunk

The FBS A4 ensures very high loads, thus resulting in fewer anchoring points.... more

The FBS A4 ensures very high loads, thus resulting in fewer anchoring points. The enhanced stainless steel version A4 now also allows anchoring applications in outdoor and damp areas. The version type CSK (countersunk head) offers expanded use for applications with challenging designs. The ETA approval Option 1 governs the use of single-point fixings in cracked and non-cracked concrete.

 

 

       
DOWNLOAD PDF – ETA-F-11-0095-concrete-screws-FBS.pdf (2,1 MB)

FIS H K – Anchor Sleeve Nylon For Chemical Injection

The versatile fixing system with injection anchor sleeves for perforated brick... more

The versatile fixing system with injection anchor sleeves for perforated brick masonry.

The plastic fischer injection anchor sleeve FIS H K is the system component for the use of fischer injection mortars in perforated brick masonry within through-type installations. To do so, the anchor sleeve is placed in the drill hole and filled with injection mortar from the anchor sleeve base. When setting the rod anchor or the internal threaded anchor, the mortar is pressed through the lattice structure and then connects with the perforated brick by an interlock. This means that the load is directed into the building material. Non-bearing layers can also be bridged with the injection anchor sleeve.

     

Frame Fixing SXR FUS

The all-round solution with short drill hole depth The SXR FUS is suitable... more

The all-round solution with short drill hole depth

The SXR FUS is suitable for push-through installation. The special functioning allows for use in solid and hollow building materials with an anchorage depth of just 50mm, ensuring an economical fixing. The SXR FUS expands in solid building materials and knots in hollow building materials with no impact drilling.

         
DOWNLOAD PDF – ETA-Approval-07-0121 Fischer Frame Fixing (5,1 MB)

Frame Fixing SXR T

The all-round solution with short drill hole depth The SXR is suitable for... more

The all-round solution with short drill hole depth

The SXR is suitable for push-through installation. The special functioning allows for use in solid and hollow building materials with an anchorage depth of just 50mm, ensuring an economical fixing. The SXR expands in solid building materials and knots in hollow building materials with no impact drilling.

         
DOWNLOAD PDF – ETA-Approval-07-0121 Fischer Frame Fixing (5,1 MB)

High Performance Anchor FH II CSK

The push-through anchor for fixings with sophisticated design in cracked... more

The push-through anchor for fixings with sophisticated design in cracked concrete.

The anchor construction allows for wide-ranging head shapes for fixing points with sophisticated design. The ideal interaction of screw shank and sleeve allows for a high shear load, thus fewer fixing points are required. The international approvals guarantee maximum safety and the best performance. These approvals even cover use in earthquake zones (seismic). The optimized geometry reduces the energy required for installation.

 

         
DOWNLOAD PDF – Approval ETA 07-0025 High Performance Anchor FH II (3,8 MB)
DOWNLOAD PDF – Approval ICC High-performance-anchor-FH-II (0,9 MB)

High Performance Anchor FH II S

The push-through anchor for fixings with sophisticated design in cracked... more

The push-through anchor for fixings with sophisticated design in cracked concrete

The anchor construction allows for wide-ranging head shapes for fixing points with sophisticated design. The ideal interaction of screw shank and sleeve allows for a high shear load, thus fewer fixing points are required. The international approvals guarantee maximum safety and the best performance. These approvals even cover use in earthquake zones (seismic). The optimized geometry reduces the energy required for installation.

         
DOWNLOAD PDF – Approval ETA 07-0025 High Performance Anchor FH II (3,7 MB)
DOWNLOAD PDF – Approval ICC High Performance Anchor FH II (0,9 MB)

 

Internally Threaded Ruspert® – Concrete Screws

This screws offers unlimited application possibilities. It is usable without... more

This screws offers unlimited application possibilities. It is usable without special tools only with an impact wrench. It is simple and fast to use. No special tools are required. The RUSPERT® coating provides excellent corrosion protection.

The internally threaded concrete screw gets driven into the drill hole with an impact wrench.

For the use in concrete (non-safety relevant applications).

FTC Zinc Alu Spray – 400 ml

Ideal for repairing damaged zinc coatings using colour matching corrosion... more

Ideal for repairing damaged zinc coatings using colour matching corrosion protection.

Zinc Alu Spray enables a subtle repair to damaged hot-dip galvanised areas thanks to its colour matching with the hot-dip galvanisation. Thanks to the excellent holding properties on bare metal, it guarantees a lasting connection to the base material. The fast-drying Zinc Alu Spray guarantees good, weatherproof corrosion protection and, as such, is suitable for use both indoors and out.

  • For all iron and steel surfaces
  • Hot-dip galvanised surfaces following drilling, ironwork or welding
  • Non-ferrous heavy metal

 

DOWNLOAD PDF – GHS Safety Data Sheet: FTC Zinc Alu Spray 4.0 (0,3 MB)

FTC-ZS Zinc Spray – 400 ml

Fast-drying surface and corrosion protection with outstanding long-term effect... more

Fast-drying surface and corrosion protection with outstanding long-term effect for metals.

The FTC Zinc Spray are useful for all kind of metals that need corrosion protection and is perfect for the coating of drilling and cutting points as well as welded joints. The surface is dust-dry after just approx. 8 minutes and it is fully hardened within 24 hours. The FTC Zinc Spray have excellent corrosion protection with long-term effect and a heat-resistant up to approx. 500°C.

 

Sales Units: 12 pcs

DOWNLOAD PDF – GHS Safety Data Sheet: FTC-ZS Zinc Spray 5.0 (0,7 MB)