Showing all 14 results

AM Premium Concrete Screw

High end, powerful screw solution for fast and simple installation. The AM... more

High end, powerful screw solution for fast and simple installation.

The AM Premium Concrete Screws are simple and time-saving threaded screws for the use in concrete and the RUSPERT® coating provides excellent corrosion protection. Once screwed into the hole the thread taps into concrete for positive fit anchorage. The concrete screw are completely removable anchor suitable for temporary fixings and virtually expansion-free operation allows cost-efficient fixing with small axial spaces and edge distances.

Anchormark Logo

 

   
DOWNLOAD PDF – ETA-15-0905 Premium Concrete-Screw AM (0,9 MB)

Bolt Anchor FAZ II

For highest demands. Powerful and flexible. The FAZ II is suitable for... more

For highest demands. Powerful and flexible.

The FAZ II is suitable for prepositioned and push-through installation and is also ideal for standoff installation thanks to the long thread. The FAZ ll expansion clip enables the highest load bearing capacity, thus fewer fixing points and smaller anchor plates are required. The reduced anchorage depth allows for significantly reduced drill hole depths and thus a noticeably quicker installation. Fewer hammer blows when hammering in the anchor, together with the low torque slippage, ensure a noticeably simple and comfortable setting process

 

 

DOWNLOAD PDF – Approval ETA 05-0069 Bolt Anchor FAZ II (3 MB)
DOWNLOAD PDF – Approval ICC ESR-2948-2020 Bolt Anchor FAZ II (1,0 MB)

Bolt Anchor FBN II

The cost-efficient fixing for flexible use in non-cracked concrete. The FBN II... more

The cost-efficient fixing for flexible use in non-cracked concrete.

The FBN II is suitable for prepositioned and push-through installation; also suitable for stand-off installation under certain conditions. The standard anchorage depth achieves the maximum load-bearing capacities, thus fewer fixing points and smaller anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This minimizes the amount of time needed for installation whilst increasing flexibility.

 

 
DOWNLOAD PDF – Approval ETA 07-0211 Bolt Anchor FBN II (2,3 MB)

FIS H K – Anchor Sleeve Nylon For Chemical Injection

The versatile fixing system with injection anchor sleeves for perforated brick... more

The versatile fixing system with injection anchor sleeves for perforated brick masonry.

The plastic fischer injection anchor sleeve FIS H K is the system component for the use of fischer injection mortars in perforated brick masonry within through-type installations. To do so, the anchor sleeve is placed in the drill hole and filled with injection mortar from the anchor sleeve base. When setting the rod anchor or the internal threaded anchor, the mortar is pressed through the lattice structure and then connects with the perforated brick by an interlock. This means that the load is directed into the building material. Non-bearing layers can also be bridged with the injection anchor sleeve.

     

FZUB – Undercut Drill Bit for ZYCON Hammerset

Special drill bit for creating undercut drill holes in concrete for processing... more

Special drill bit for creating undercut drill holes in concrete for processing the ZYCON undercut anchors FZA, FZA-I, and FZEA. Drill bit with stop plate and joint for quick, approval-compliant creation of conical undercut drill holes. The top features:

  • SDS-Plus adapter
  • High-quality, durable design.

 

 

HammerSet Anchor EA II

The internally threaded anchor with rim for simple hammerset installation The... more

The internally threaded anchor with rim for simple hammerset installation

The Hammerset EA II is suitable for pre-positioned installation. The sleeve is then expanded against the drill hole wall by driving in the internal bolt with the EAW H Plus setting tool (alternative: EA II-SDS machine setting tool). The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammers installation. The metric internal thread has an ideal adaptation ability, allowing for the use of standard screws or threaded rods to suit the intended purpose.

DOWNLOAD PDF – Approval-ETA 07-0135 HammerSet Anchor EA-II (2,2 MB)

High Performance Anchor FH II CSK

The push-through anchor for fixings with sophisticated design in cracked... more

The push-through anchor for fixings with sophisticated design in cracked concrete.

The anchor construction allows for wide-ranging head shapes for fixing points with sophisticated design. The ideal interaction of screw shank and sleeve allows for a high shear load, thus fewer fixing points are required. The international approvals guarantee maximum safety and the best performance. These approvals even cover use in earthquake zones (seismic). The optimized geometry reduces the energy required for installation.

 

         
DOWNLOAD PDF – Approval ETA 07-0025 High Performance Anchor FH II (3,8 MB)
DOWNLOAD PDF – Approval ICC High-performance-anchor-FH-II (0,9 MB)

High Performance Anchor FH II S

The push-through anchor for fixings with sophisticated design in cracked... more

The push-through anchor for fixings with sophisticated design in cracked concrete

The anchor construction allows for wide-ranging head shapes for fixing points with sophisticated design. The ideal interaction of screw shank and sleeve allows for a high shear load, thus fewer fixing points are required. The international approvals guarantee maximum safety and the best performance. These approvals even cover use in earthquake zones (seismic). The optimized geometry reduces the energy required for installation.

         
DOWNLOAD PDF – Approval ETA 07-0025 High Performance Anchor FH II (3,7 MB)
DOWNLOAD PDF – Approval ICC High Performance Anchor FH II (0,9 MB)

 

Internally Threaded Ruspert® – Concrete Screws

This screws offers unlimited application possibilities. It is usable without... more

This screws offers unlimited application possibilities. It is usable without special tools only with an impact wrench. It is simple and fast to use. No special tools are required. The RUSPERT® coating provides excellent corrosion protection.

The internally threaded concrete screw gets driven into the drill hole with an impact wrench.

For the use in concrete (non-safety relevant applications).

Setting Tool EAW H Plus for HammerSet EA II

Highest safety through perfect expansioning of the anchor. Manual setting tool... more

Highest safety through perfect expansioning of the anchor.

Manual setting tool with hand impact protection for fixing Fischer Hammerset anchors EA II M10. The manual setting tool is build with ergonomic plastic to handle and hand impact protection for quick, safe fixing of Fischer Hammerset anchors EA II.

 

Ultracut FBS II – CSK – Concrete Screw, Countersunk Head

The high-performance concrete screw for easy installation. Ultracut provides... more

The high-performance concrete screw for easy installation.

Ultracut provides the best possible flexibility in load and fixture thickness with up to three permitted screw-in depths. The specialized saw tooth geometry allows it to cut quickly into the concrete. No drill hole cleaning is required for mounting in ceilings or floors or when using hollow drill bits with suction. The anchoring is free from expansion pressure (undercut), ensuring the lowest possible axial spacing and edge spacing. ETA approval covers application in cracked concrete, as well as seismic performance categories C1 and C2. Adjustments conforming to the approval makes it possible to loosen the concrete screws 2x, to place materials under and/or align the anchor base plate. National approval regulates multiple uses for temporary anchoring (e.g. formwork construction).

 

         
DOWNLOAD PDF – ETA-Approval-15-0352-Fischer-Ultracut-FBS II (4,1 MB)
DOWNLOAD PDF – Technical Data Sheet – Ultracut-FBS II (0,25 MB)

 

Ultracut FBS II – US – Concrete Screw, Hex Head

The high-performance concrete screw for easy installation. Ultracut provides... more

The high-performance concrete screw for easy installation.

Ultracut provides the best possible flexibility in load and fixture thickness with up to three permitted screw-in depths. The specialized saw tooth geometry allows it to cut quickly into the concrete. No drill hole cleaning is required for mounting in ceilings or floors or when using hollow drill bits with suction. The anchoring is free from expansion pressure (undercut), ensuring the lowest possible axial spacing and edge spacing. ETA approval covers application in cracked concrete, as well as seismic performance categories C1 and C2. Adjustments conforming to the approval makes it possible to loosen the concrete screws 2x, to place materials under and/or align the anchor base plate. National approval regulates multiple uses for temporary anchoring (e.g. formwork construction).

 

         
DOWNLOAD PDF – ETA-Approval-15-0352-Fischer-Ultracut-FBS II (4,1 MB)
DOWNLOAD PDF – Technical Data Sheet – Ultracut-FBS II (0,25 MB)