Showing all 20 results

DUOTEC

DUOTEC Nylon Toggle The DUOTEC is an easy to install nylon toggle for high... more

DUOTEC Nylon Toggle

The DUOTEC is an easy to install nylon toggle for high loads in all panel building materials. The unique function and toggle geometry of the fischer DUOTEC allows it to handle very heavy loads for a gravity toggle. Where multiple fixings are required, this reduces the number of fixings and maximizes security. As a member of the DUO line, the fischer DUOTEC comprises two plastic components. The red and hard component of the plug sleeve facilitates the consistent distribution of the load, while the grey and soft component prevents damage to the panel’s surface by the fixing, reducing the load. The fischer DUOTEC is set like a gravity toggle for applications in panel building materials. The toggle can also be used as an expansion plug in solid building materials.

 

 

 

 

Hollow Drill Bit FHD – SDS PLUS IV / SDS MAX IV

For drilling with low dust as well as efficient andapproved anchoring. The... more

For drilling with low dust as well as efficient and approved anchoring.

The fischer hollow drill bit FHD enables drilling and drill hole cleaning in one single step. The dust on a construction site can be reduced enormously; preventing the end user, as well as the environment, from being exposed to drilling dust. The wear mark on the drill head enables easy identification of the wear limit according to PGM®. This drill bit is ideal for drilling overhead holes and in enclosed spaces.

To create approval-compliant drill holes in reinforced concrete and concrete; as well as being suitable for solid brick, solid sand-lime brick and natural stone.

 

 

Hammerfix N-S D A2 – Nail Head Seal Washer, Stainless A2

The hammer-in plug for a simple, fast and economical installation. The... more

The hammer-in plug for a simple, fast and economical installation.

The Hammerfix N-S D A2 with nail head seal washer is suitable for push-through installation. When hammered in, the nail screw causes the plug to expand in two directions, thus providing a secure anchoring in the building material. The rapid hammerset installation reduces the amount of time required and allows for an economic series installation and the integrated hammer-in stop prevents the plug from expanding prematurely (jamming), thus enabling a problem-free installation.

 

    

 

Hammer Drill Bit SDS Plus Quattric II

For the best performance in reinforced concrete. The carbide head provides for... more

For the best performance in reinforced concrete.

The carbide head provides for a long service life, with power shoulders for improved breakup performance in concrete. The massive main cutting edges ensure quick drilling progress, and the reinforcement chamfers prevent jamming in the reinforcement. The drill bit has a centring tip for simple positioning and a wear mark for simple recognition of wear limit in accordance with PGM. The two piece spiral also contributes to quick drilling progress and an increased service life.

 

 

Concrete Grinding Discs

Concrete grinding discs are the perfect abrasive solution for concrete and... more

Concrete grinding discs are the perfect abrasive solution for concrete and natural stone.

Concrete grinding discs are ideal for the removal of – unevenness on floor pavement, roughness on stone and plaster flooring, concrete ridges after the removal of form-work, dried plaster residues, concrete and paving stone, gas aerated concrete, thermoplastic protective coatings and adhesive residue on concrete surfaces. They feature a high removal capacity and a high service life.

Hammerfix N-FN – Mushroom Head Nylon Nail

The hammer-in plug for a simple, fast and economical installation. The... more

The hammer-in plug for a simple, fast and economical installation.

The Hammerfix N-FX with mushroom head and nylon nail is suitable for push-through installation. When hammered in, the nail screw causes the plug to expand in two directions, thus providing a secure anchoring in the building material. The rapid hammerset installation reduces the amount of time required and allows for an economic series installation and the integrated hammer-in stop prevents the plug from expanding prematurely (jamming), thus enabling a problem-free installation.

 

    

 

Hammer Drill Bit SDS MAX

The hammer drill bits with SDS Max drill chuck. The SDS Max drill chuck... more

The hammer drill bits with SDS Max drill chuck.

The SDS Max drill chuck ensures optimum transfer of force and allows for rapid drilling progress for large volume drill holes and the drill bit head with four cutting edges prevents jamming in the concrete reinforcement. The quadruple flute reliably transports the drilling dust from the drill hole, thus reducing wear. The core-reinforced flute ensures maximum transfer of energy, and guarantees a low-vibration drilling. The PGM®-compliant cutting element guarantees perfect-fit drill holes and satisfies the highest safety requirements.

To create approval-compliant drill holes in concrete and masonry; as well as being suitable for use in natural stone.

 

 

DuoPower – Expansion Plug 2K

The duo of power and intelligence. The fischer 2 K-Nylon Plug DUOPOWER is... more

The duo of power and intelligence.

The fischer 2 K-Nylon Plug DUOPOWER is suitable for prepositioned and push-through installation. The duo of two different materials and its multi-functional abilities (expanding, folding, and knotting) extend the range of applications to additional materials with top loads. The plug has received great feedback, with users commenting on the feel-good factor. You can feel exactly when the plug is installed perfectly.

 

 

 

AM 35 – Powder Actuated Tool – Single Shot

The Power Drive AM35 Stud Driver is a safe tool that can be employed for a wide... more

The Power Drive AM35 Stud Driver is a safe tool that can be employed for a wide range of applications by professional, certified users for driving elements of the AnchorMark accessories product range developed specially for this field of application into concrete, steel, solid brick and solid lime-sand brick.

Anchormark Logo

 

fischer Nylon Expansion ANCHOR M with Brass Cone for Metric Thread

The powerful nylon expansion anchor with brass cone for metric threads. The... more

The powerful nylon expansion anchor with brass cone for metric threads.

The anchor’s high expansion makes it insensitive to building material imperfections. This guarantees a simple and secure installation and the internal thread allows for the use of standard metric screws or threaded rods, and for surface flush removal and reuse of the fixing point, providing great flexibility.

 

 

 

Stud AN – Nail for Powder Actuated Tool

The smooth shaft of the Stud AN is built from high-strength steel, mechanically... more

The smooth shaft of the Stud AN is built from high-strength steel, mechanically galvanised (minimum surface thickness 8 μm) and with ballistic tip. It can be used for Stud Driver AM 35 and AM 60.

Sales units: 200 pcs

SHA 15 – Electrical Cable Harness

The adaptable cable harness for fixing cable bundles. The fischer cable... more

The adaptable cable harness for fixing cable bundles.

The fischer cable harness SHA is a solution for fixing several electric cables in a bundle in a cost-effective manner. The cable harness can be simply reused due to the seal. The cable harness can be fastened with ClipFix plus, installation base MS, or with plug and screw in concrete and solid brick made out of pumice and sand-lime. For fast, cost-effective assembly, the cable harnesses can be combined below each other, or be arranged alongside each other using the connection piece SHA KP.

 

 

 

Stud ANS – Single Shot Nail for Powder Actuated Tool

The knurled shaft of the Stud ANS is built from high-strength steel,... more

The knurled shaft of the Stud ANS is built from high-strength steel, mechanically galvanised (minimum surface thickness 8 μm) and with ballistic tip for maximum holding force in steel. It can be used for Stud Driver AM 35 and AM 60.

Sales units: 200 pcs

SHA 30 – Electrical Cable Harness

The adaptable cable harness for fixing cable bundles. The fischer cable... more

The adaptable cable harness for fixing cable bundles.

The fischer cable harness SHA is a solution for fixing several electric cables in a bundle in a cost-effective manner. The cable harness can be simply reused due to the seal. The cable harness can be fastened with ClipFix plus, installation base MS, or with plug and screw in concrete and solid brick made out of pumice and sand-lime. For fast, cost-effective assembly, the cable harnesses can be combined below each other, or be arranged alongside each other using the connection piece SHA KP.

 

 

 

Stud AN W25 – Nail with Washer for Powder Actuated Tool

The knurled shaft of the Stud ANS is built from high-strength steel,... more

The knurled shaft of the Stud ANS is built from high-strength steel, mechanically galvanised (minimum surface thickness 8 μm) and with ballistic tip for maximum holding force in steel. It can be used for Stud Driver AM 35 and AM 60.

.

PU 1 – 750ml – B3 Rapid Installation Foam (one component)

The high-quality installation foam with reusable fix adapter system. The... more

The high-quality installation foam with reusable fix adapter system.

The rapid installation foam PU 1 has been approved as watertight by an external inspection and is thus suitable for use in wet conditions. It fulfills the requirements of a well foam. The reclosable fix adapter allows for immediate use and for the reuse of opened cans, thus guaranteeing long-lasting functionality. The ergonomic handle sits perfectly in the hand and allows for easy use.

 

 

Sales Units: 12 pcs

DOWNLOAD PDF – GHS Safety Data Sheet: B3 Foam 5.0 (MCCP) (0,2 MB)

Stud ANC – Nail with Ceiling Bracket for Powder Actuated Tool

The knurled shaft of the Stud ANC is built from high-strength steel,... more

The knurled shaft of the Stud ANC is built from high-strength steel, mechanically galvanised (minimum surface thickness 8 μm) and with ballistic tip for maximum holding force in steel. It can be used for Stud Driver AM 35 and AM 60.

.

Sales units: 200 pcs

Hammerfix N

The hammer-in plug for a simple, fast and economical installation. The... more

The hammer-in plug for a simple, fast and economical installation.

The Hammerfix N is suitable for push-through installation. When hammered in, the nail screw causes the plug to expand in two directions, thus providing a secure anchoring in the building material. The rapid hammerset installation reduces the amount of time required and allows for an economic series installation and the integrated hammer-in stop prevents the plug from expanding prematurely (jamming), thus enabling a problem-free installation.

 

 

    

 

PUP – 750ml – B3 Expanding Foam for Gun (one component PU)

The gun foam with the perfect dosage. The easy dosage of the PUP B3- Foam... more

The gun foam with the perfect dosage.

The easy dosage of the PUP B3- Foam allows a controlled filling and sealing and ensures that the correct amount is used. The perfect-fit connection between the can and the gun means that work can be interrupted for as long as you like, and thus guarantees long-lasting functionality. The proven 60dB sound insulation fulfills the standards of modern sound insulation and helps to reduce noise in line with ISO EN 717-1.

 

 

Sales Units: 12 pcs

DOWNLOAD PDF – GHS Safety Data Sheet: B3 Foam 5.0 (MCCP) (0,6 MB)

Stud AN – Magazined Nails for Powder Actuated Tool

The AN stud is suitable for the permanent and temporary fixing of fasteners in... more

The AN stud is suitable for the permanent and temporary fixing of fasteners in structural steel, concrete, solid brick and solid lime-sand brick. Studs in magazines can only be used in stud drivers having a suitable magazine.

The smooth shaft of the AN Stud is built from high-strength steel, mechanically galvanised (minimum surface thickness 8 μm) and with ballistic tip. It can be used for Stud Driver AM 60.

.

Sales units: 200 pcs