Showing all 6 results

Aircrete Anchor GB

Approved safety for aerated concrete. The Aircrete Anchor GB from fischer is... more

Approved safety for aerated concrete.

The Aircrete Anchor GB from fischer is suitable for pre-positioned installation. The self-tapping metal fixing GB taps itself into the plasterboard with a positive fit. The spiral-shaped outer ribs cut a positive fit in the soft building material, thus ensuring the best pressure distribution and load-bearing capacity. The Aircrete Anchor GB can be installed with a hammer – there is no need for special tools, thus saving time and money for the installation.

 

 

Bolt Anchor FAZ II

For highest demands. Powerful and flexible. The FAZ II is suitable for... more

For highest demands. Powerful and flexible.

The FAZ II is suitable for prepositioned and push-through installation and is also ideal for standoff installation thanks to the long thread. The FAZ ll expansion clip enables the highest load bearing capacity, thus fewer fixing points and smaller anchor plates are required. The reduced anchorage depth allows for significantly reduced drill hole depths and thus a noticeably quicker installation. Fewer hammer blows when hammering in the anchor, together with the low torque slippage, ensure a noticeably simple and comfortable setting process

 

 

DOWNLOAD PDF – Approval ETA 05-0069 Bolt Anchor FAZ II (3 MB)
DOWNLOAD PDF – Approval ICC ESR-2948-2020 Bolt Anchor FAZ II (1,0 MB)

Bolt Anchor FBN II

The cost-efficient fixing for flexible use in non-cracked concrete. The FBN II... more

The cost-efficient fixing for flexible use in non-cracked concrete.

The FBN II is suitable for prepositioned and push-through installation; also suitable for stand-off installation under certain conditions. The standard anchorage depth achieves the maximum load-bearing capacities, thus fewer fixing points and smaller anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This minimizes the amount of time needed for installation whilst increasing flexibility.

 

 
DOWNLOAD PDF – Approval ETA-18/0101 Bolt Anchor FBN II (2,3 MB)

High Performance Anchor FH II CSK

The push-through anchor for fixings with sophisticated design in cracked... more

The push-through anchor for fixings with sophisticated design in cracked concrete.

The anchor construction allows for wide-ranging head shapes for fixing points with sophisticated design. The ideal interaction of screw shank and sleeve allows for a high shear load, thus fewer fixing points are required. The international approvals guarantee maximum safety and the best performance. These approvals even cover use in earthquake zones (seismic). The optimized geometry reduces the energy required for installation.

 

         
DOWNLOAD PDF – Approval ETA 07-0025 High Performance Anchor FH II (3,8 MB)
DOWNLOAD PDF – Approval ICC High-performance-anchor-FH-II (0,9 MB)

High Performance Anchor FH II S

The push-through anchor for fixings with sophisticated design in cracked... more

The push-through anchor for fixings with sophisticated design in cracked concrete

The anchor construction allows for wide-ranging head shapes for fixing points with sophisticated design. The ideal interaction of screw shank and sleeve allows for a high shear load, thus fewer fixing points are required. The international approvals guarantee maximum safety and the best performance. These approvals even cover use in earthquake zones (seismic). The optimized geometry reduces the energy required for installation.

         
DOWNLOAD PDF – Approval ETA 07-0025 High Performance Anchor FH II (3,7 MB)
DOWNLOAD PDF – Approval ICC High Performance Anchor FH II (0,9 MB)

 

ZYKON Hammerset Anchor FZEA II

The internally threaded anchor with low anchoring depth for individual fixings... more

The internally threaded anchor with low anchoring depth for individual fixings in cracked concrete.

The fischer ZYKON HammerSet anchor FZEA II is suitable for pre-positioned installation. The undercut drill hole is created using the special FZUB drill. Once the anchor has been placed in the drill hole, the expansion sleeve is expanded by the driving in of the internal expansion pin with the FZED Plus setting tool, and the undercut drill hole is filled with a positive fit. The combination of hammerset and ZYKON undercut anchor allows for individual fixings in cracked concrete and the special ZYKON undercut technology reduces the energy required for installation. The FZUB special drill allows for a fast installation by creating the undercut without having to change tools. The embossing that is applied when expanding the anchor secures the simple control of the anchoring.

DOWNLOAD PDF – Approval-ETA 06-0271 HammerSet Anchor ZYKON EA-II (3,6 MB)