Chemical Anchoring – main category

Showing all 15 results

FIS V 410 C – Injection Mortar (water filled holes)

The versatile injection mortar for anchorings in masonry and cracked... more

The versatile injection mortar for anchorings in masonry and cracked concrete.

The injection mortar FIS V 410 C is a 2-component injection mortar based on vinyl ester for water filled drill holes. It is approved for use in cracked and non-cracked concrete, masonry and for special applications. FIS V is thus the universal injection mortar family with guaranteed reliability for practically all areas of application.

 

 

 

DOWNLOAD PDF – ETA 02-0024 Injection Mortar FIS V 05/20 (3,1 MB)
DOWNLOAD PDF – ETA 08-0266: Injection Mortar FIS V Rebar Connection 01/20 (2,5 MB)
DOWNLOAD PDF – ETA 10-0383: Injection Mortar FIS V Masonry 10/17 (9,1 MB)
DOWNLOAD PDF – ICC – ESR 2786: Injection Mortar FIS V (2,1 MB)
DOWNLOAD PDF – GHS Safety Data Sheet FIS V 410 C (0.3 MB)

FIS V 300 T – Injection Mortar

The versatile injection mortar for anchorings in masonry and cracked... more

The versatile injection mortar for anchorings in masonry and cracked concrete.

The injection mortar FIS V 300 T is a 2-component injection mortar based on vinyl ester. It is approved for use in cracked and non-cracked concrete, masonry and for special applications. FIS V is thus the universal injection mortar family with guaranteed reliability for practically all areas of application.

 

 

 

DOWNLOAD PDF – ETA 02-0024 Injection Mortar FIS V 05/20 (3,1 MB)
DOWNLOAD PDF – ETA 08-0266: Injection Mortar FIS V Rebar Connection 01/20 (2,5 MB)
DOWNLOAD PDF – ETA 10-0383: Injection Mortar FIS V Masonry 10/17 (9,1 MB)
DOWNLOAD PDF – ICC – ESR 2786: Injection Mortar FIS V (2,1 MB)
DOWNLOAD PDF – GHS Safety Data Sheet FIS V 300 T (0.3 MB)

FIS EM PLUS – Epoxy Mortar

The powerful injection mortar for rebar connections and cracked... more

The powerful injection mortar for rebar connections and cracked concrete.

The injection system, comprising the epoxy resin mortar FIS EM Plus combined with a threaded rod, is suitable for pre-positioned and push-through installation. Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the injection capsule in the static mixer. The mortar is injected bubble-free from the drill hole base. It can be processed at low temperatures down to 0°C (outside of the assessment even down to -5°C) as well as seismic applications of performance categories C1, C2.

 

 

 

DOWNLOAD PDF – ESR 1990 – FIS EM Plus Epoxy Mortar (2,8 MB)
DOWNLOAD PDF – ETA 17-0979: Epoxy Mortar FIS EM Plus 06/20 (3,8 MB)
DOWNLOAD PDF – ETA 17-1056: Epoxy Mortar FIS EM 01/21 (5,7 MB)
DOWNLOAD PDF – GHS Safety Data Sheet FIS EM Plus (0.5 MB)

Cordless Dispenser FIS DCD S – 7,2V (LI-ION)

High-quality battery-powered dispenser for 2-chamber cartridges for quick... more

High-quality battery-powered dispenser for 2-chamber cartridges for quick progress without great effort.

The fischer battery pack FIS DCD S is suitable for quickly dispensing fischer injection cartridges up to 390 ml without great effort.

Content:

  • 1 dispenser
  • 2 x 7.2 V Li-ION
  • 1 charger 7.2 V

Pneumatic Dispenser FIS AP for 300, 360, 390 ml cartridges

High-quality dispenser for 2-chamber cartridges with compressed air... more

High-quality dispenser for 2-chamber cartridges with compressed air technology.

The FIS AP is suitable for quick, fatigue-free dispensing of injection cartridges up to 390 ml. The FIS AP with compressed air drive is especially recommended for work on rebar connections .

Recommended pressure 6 bar air consumption max. 40ml/min.

 

Adapted forFIS V 360 S, FIS HB 345 S, FIS HB 150 C,FIS EM 390 S, FIS VS 150 C, FIS VW 360 S,FIS P 360 S, FIS P 300 T, FIS SB 390 S,FIS PM 360 S, FIS VL 300 T and 1K-cartridges

 

Superbond Resin Capsule RSB

The powerful injection mortar for rebar connections and cracked... more

The powerful injection mortar for rebar connections and cracked concrete.

The Superbond resin capsule RSB is approved for cracked and non-cracked concrete and it is especially economical for individual application and overhead installations.The resin capsule RSB is fast curing, enabling an installation without waiting times and approved processing at frosty temperatures of –30°C. The approval for seismic applications, water filled and diamond drilled holes ensures safety under extreme conditions.

 

 

 
DOWNLOAD PDF – ETA 12/0258 Superbond Resin Capsule 07/19  (3,7 MB)
DOWNLOAD PDF – ICC – ESR 3572: Superbond (1,8 MB)
DOWNLOAD PDF – Safety Data Sheet (0,2 MB)

Threaded Rod Internally: RGMI – Chisel Point

The fixing system with internally threaded anchor for non-cracked... more

The fixing system with internally threaded anchor for non-cracked concrete

Often used for removable or temporary fixings, e.g. for machines. The internally threaded anchor RG MI allows for surface flush removal and reuse of the fixing point, and therefore offers the best possible flexibility. The metric internal thread has an ideal adaptation ability, allowing for the use of standard screws or threaded rods to suit the intended purpose.

 

 

 

DOWNLOAD PDF – ETA-12/0258: internally threaded rod (3 MB)

 

Threaded Rod: RG M – Stainless, Chisel Point

The proven rod anchor for external use with a mortar cartridge or injection... more

The proven rod anchor for external use with a mortar cartridge or injection mortar.

The fischer rod anchor RG M is produced from stainless steel. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in external areas.

Threaded Rod: ATR – Galvanised, Chisel Point

The injection system is suitable for prepositioned and push-through... more

The injection system is suitable for prepositioned and push-through installation when combined with threaded rod ATR. The mortar is extruded bubble free from the drill hole base and the mortar bonds the entire surface of the threaded rod with the drill hole wall and seals the drill hole. The threaded rod is set manually, by lightly rotating it until it reaches the drill hole base.

Version: Hot dip galvanized, Grade 5.8

Anchormark Logo

FIS H K – Anchor Sleeve Nylon For Chemical Injection

The versatile fixing system with injection anchor sleeves for perforated brick... more

The versatile fixing system with injection anchor sleeves for perforated brick masonry.

The plastic fischer injection anchor sleeve FIS H K is the system component for the use of fischer injection mortars in perforated brick masonry within through-type installations. To do so, the anchor sleeve is placed in the drill hole and filled with injection mortar from the anchor sleeve base. When setting the rod anchor or the internal threaded anchor, the mortar is pressed through the lattice structure and then connects with the perforated brick by an interlock. This means that the load is directed into the building material. Non-bearing layers can also be bridged with the injection anchor sleeve.

   

Dispenser FIS AM for 300, 360, 390 ml cartridges

Heavy duty metal resin applicator which now accepts more fischer hybrid resin... more

Heavy duty metal resin applicator which now accepts more fischer hybrid resin cartridges. The gun is made from high-quality plastics, making it tough and durable.

Adapted for :FIS V 360 S, FIS HB 345 S, FIS HB 150 C, FIS EM 390 S, FIS VS 150 C, FIS VW 360 S, FIS P 360 S, FIS P 300 T, FIS SB 390 S, FIS PM 360 S, FIS VT 360 S and 1K-cartridges

 

FIS SB 390 S – Superbond Mortar

The concrete all - rounder. Thanks to its high bond strength, Superbond... more

The concrete all – rounder.

Thanks to its high bond strength, Superbond mortar FIS SB achieves a very high load level for safe use in cracked and non-cracked concrete. The Superbond mortar can even be used at extremely high temperatures of up to +150 °C. This opens up new application fields, where no chemical anchor could be used previously. The Superbond mortar FIS SB is approved for seismic applications, which ensures safety even under extreme conditions.

 

 
DOWNLOAD PDF – ETA-12/0258: Superbond mortar FIS SB 390 S (5,6 MB)
DOWNLOAD PDF – ICC – ESR 3572: Superbond mortar FIS SB 390 S (1,8 MB)
DOWNLOAD PDF – GHS Safety Data Sheet FIS SB A (0.5 MB)
DOWNLOAD PDF – GHS Safety Data Sheet FIS SB B (0.5 MB)

Dispenser FIS DM S

High-quality dispenser for 2-chamber cartridges for quick, fatigue-free... more

High-quality dispenser for 2-chamber cartridges for quick, fatigue-free work.

The dispenser FIS DM S is suitable for quick, fatigue-free dispensing of injection cartridges up to 390 ml.